• PCIe Gen4 EDSFF Host Adapters Datasheet

Teledyne LeCroy’s Gen4 EDSFF Host Adapters provide a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe®) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s. Each host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT). The PCIe 4.0 x4 EDSFF Host adapter provides connectivity capability for E1.S or E1.L type devices targeted at enterprise systems that use the SFF-TA-1002 multi-lane card edge connector.

Currently, four form factor devices can be used in the two EDSFF Adapters:

• E1.S (PE-1002-2-X16Host2-X) Adapter for both the EDSFF 1U short/narrow and EDSFF 1U short/wide form factors as defined in SFF-TA-1006 specification
• E1.L (PE-1002-2-X16Host-X) Adapter for both the EDSFF 1U long/narrow and EDSFF 1U long/wide form factors as defined in SFF-TA-1007 specification

 

• PCIe 4.0 OCP NIC 3.0 Host Adapter Datasheet

Teledyne LeCroy’s PCI Express PCIe® 4.0 OCP NIC 3.0 Host adapter allows users to connect a OCP NIC 3.0 device into a PCIe CEM slot. The adapter supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s, side band signals such as PERST#, WAKE# and SMBus (SMBCLK, SMBDAT). The PCIe 4.0 OCP NIC 3.0 adapter supports link widths up to x16.

• PCIe 4.0 U.2 and U.3 Host Adapter Cards Datasheet

Teledyne LeCroy’s Gen4 U.2 and U.3 Host Adapters provide a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s. Each host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT).

• G4 U.2 Port A to PCIe G4 x4 Slot Adapter- Port A U.2 x4 Routing 4 lanes of port A from U.2 connector straight to the bottom PCIe CEM edge fingers
• G4 U.2 Port B to PCIe G4 Slot Adapter- Port B U.2 x2 Routing 2 lanes of port B from U.2 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
• G4 U.3 Port A to PCIe G4 Slot Adapter- Port A U.3 x4 Routing 4 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers
• G4 U.3 Port A x2 to PCIe G4 Slot Adapter- Port A U.3 x2 Routing 2 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
• G4 U.3 Port B x2 to PCIe G4 Slot Adapter- Port B U.3 x2 Routing 2 lanes of port B from U.3 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)

• PCIe Gen4 OCuLink Cable Adapter Datasheet

The PCIe® Gen4 OCuLink Cable Adapter is a PCIe half-width CEM form factor plug in card that allows connecting a OCuLink Cable to a standard PCIe slot. To use the adapter simply plug the PCIe OCuLink cable(s) into the adapter and install the adapter into a standard PCIe slot.
 

• U.2 Transposer Adapter Datasheet

Teledyne LeCroy's U.2 Transposer Adapters allow the user to isolate data traffic from a specific port on a U.2 SSD and send it to a specific port on the host backplane. During testing of dual-port U.2 SSDs (or servers that utilize dual-port U.2 SSDs), this allows individual ports to be tested and any problems which might exist to be isolated to specific ports on the SSD or server backplane.

• Simple to use for port isolation and test
• Available in a set of four versions:
  • Host Port A to SSD Port A (Port B blocked)
  • Host Port A to SSD Port B (Port B blocked)
  • Host Port B to SSD Port A (Port A blocked)
  • Host Port B to SSD Port B (Port A blocked)
  • Supports link widths up to x2
• Supports I2C and PCIe® side band signal connectivity
• Supports data rates of 2.5 GT/s, 5 GT/s and 8 GT/s (PCIe 3.0 compliant)
• Supports DP_EN# on/off via switch
• Provides multiple test points for measurement of active signals
• Dimensions (L x W x H): 13.5 mm x 69 mm x 18.5 mm (0.53" x 2.73" x 0.73")
• Displacement of SSD: 12.1 mm (0.47”)

SKU: PE-U2-Dual Port Transposer-X

• U.2 (SFF-8639) Adapter Cards Datasheet

Teledyne LeCroy’s enhanced U.2 (SFF-8639) adapter cards provide developers with extremely versatile tools to speed development of new U.2 (SFF-8639) designs and to troubleshoot existing U.2 (SFF-8639) issues.  Features include test points and multiple power connectors to make it easier to test different devices and designs.

Two configurations are provided:  one for single-port devices and Port A of dual-port designs; and the second for Port B of dual-port designs.

Key Features:

• Allows U.2 (SFF-8639) devices to connect to PCI Express slots
• Two configurations available: Standard version supports single-port devices and Port A of dual port devices, testing for NVMe x4 or x2 or SCSI Express X4 or x2; Port B version supports the second port of dual port drives for NVMe x2 or SCSI Express x2
• Provides on-board power connectors including 75W ATX, 150W ATX, SATA, and Molex ATX
• Provides multiple test points to monitor power, clock signals, etc.
• Supports data rates up to 8 GT/s
• Supports 2.5" U.2 (SFF-8639) devices in reinforced slot
• Can be combined with PCIe slot interposer and analyzer to capture and display traffic with full decoding of NVMe and SCSI Express traffic

• U.2 (SFF-8639) Adapter Datasheet

• Allows U.2 (SFF-8639) devices to connect to PCI Express slots
• Supports up to x4 PCIe lanes
  • NVMe and SCSI Express at x4 lane widths
• Supports data rates up to 8 GT/s
• Supports 2-1/2” U.2 (SFF-8639) devices

• U.2 (SFF-8639) Adapter Datasheet
• Allows U.2 (SFF-8639) Dual Port devices to connect to PCI Express slots
• Supports up to x4 PCIe lanes
• NVMe and SCSI Express Port B x2 lane widths
• Supports data rates up to 8 GT/s
• Supports 2-1/2” U.2 (SFF-8639) devices

Teledyne LeCroy’s M.2-to-PCIe adapter cards provide developers with extremely versatile tools to speed development of new M.2 designs and to troubleshoot existing M.2 issues.  Two configurations are offered to support either M-Key or B-Key (both support B-M devices).

• M.2-to-PCIe Datasheet

• M.2 Adapter Datasheet

Teledyne LeCroy’s PCIe 3.0 M.2-to-PCIe adapter cards provide developers with extremely versatile tools to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M).SMBus is supported on the adapter.

Teledyne LeCroy’s PCIe 4.0 M.2-to-PCIe host adapter card provides developers with a extremely versatile tool to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M devices).

• PCIe 4.0 M.2-to-PCIe Datasheet

• PCIe External Cable 3.0 -to-PCIe Adapter Datasheet

• Allows PCIe external cable devices to connect directly to standard PCI Express slot
• Allows direct testing of PCIe® device functions
• Allows testing of device drivers for new PCIe external cable devices using a standard computer system
• Supports I²C and PCIe side band signal connectivity
• Supports data rates of 2.5 GT/s, 5 GT/s and 8 GT/s (PCIe 3.0 compliant)
• Supports link widths up to x16

• PCI Express x16 Right Angle Adapter, A-Side Up
• Allows user to install the PCI Express Card at a Right Angle to allow for probing of the A/Solder Side of the UUT board.

• PCI Express x16 Right Angle Adapter, B-Side Up
• Allows user to install the PCI Express Card at a Right Angle to allow for probing of the B/Component Side of the UUT board
• .

• PCI Express x16 to x1 Adapter
• Allows user to insert a x16 PCI Express Card in a x1 slot.

• PCI Express x16 to x4 Adapter
• Allows user to insert a x16 PCI Express Card in a x4 slot.

• PCI Express x16 to x8 Adapter
• Allows user to insert a x16 PCI Express Card in a x8 slot.

• EXP2PCIE Datasheet

• ExpressCARD to PCI Express Adapter
• Allows user to test ExpressCARD Module on the PCI Express bus.
• The LEDs show that the signal is asserted low to the device.
• The USB connector can monitor and capture traces using a Teledyne LeCroy protocol analyzer.

• PCIE2EXP Datasheet

• PCI Express to ExpressCARD Adapter
• Allows user to test PCI Express cards on the ExpressCARD bus.
• JP3 -- The 12 Vdc connector on the board can be used to supply power to the board.
• JR3 - The USB connector can monitor and capture traces from the motherboard using a Teledyne LeCroy analyzer.
• Jumper JP2, JP4, JP5 - Control signals for the PCIe card bus, when shorted the signals are asserted.
• Jumper JP1 - is a bypass for the 12 Vdc power connector and when shorted holds the +12 Vdc input to the PERST circuit high.

• PCI Express Mini to PCI Express Adapter
• Allows user to test PCI Express Mini modules on the PCI Express bus.
• Note: The manufacturer of the latch spring shown above, no longer sells the latch, therefore these adapters do not ship with a latch.

• PCI Express Mini to ExpressCARD Adapter
• Allows user to test PCI Express Mini modules on the ExpressCARD bus.
• Note: The manufacturer of the latch spring shown above, no longer sells the latch, therefore these adapters do not ship with a latch.

• PCI Express x16 50 Ohm Bus Termination Adapter
• Allows user to terminate the PCI Express Rx and Tx pairs.